As shown in the image above this, vespa gear motors located on the left handlebar. Vespa is equipped with a four-speed, ranging from 1 to 4. The sequence speed shift gear on a vespa similar to the motor with a clutch on gear generally starting from 1 (one), N (neutral), two (2), 3 (three) and 4 (four).
Visible drawn, black line pointing towards the tooth to N (neutral).
If you already understand the concept of gear vespa now let us practice how to drive a vespa correct .
1. Set as default two vespa you in advance to facilitate turn on the motor.
Advertisement
2. Insert the key and turn toward the motor on. Make sure the bike is in neutral gear or designate the sign N. Then turn the machine by using the kick starter and gas slowly. Kick starter on a vespa motorcycle is located on the rear right or right on the right side Vespa engine.
3. Then we start to enter the motor gear to speed 1. By way of press and turn the handle Vespa gear toward the bottom or back so that it points toward the tooth 1 (one). Then gas began to release the clutch slowly while little by little. Do not be too quick disconnect couplings yes, then the bike can die.
4. If the engine is already running, you can add speed to gear 2 (two). By pressing the clutch Vespa and rotate the gears to the front until the teeth pointing in the direction of two (2).
5. To add speed to gear 3 (three) and 4 (four) do like to pick up speed in 2nd gear (two), so you just press the clutch and turn the gear toward the front until the teeth pointing in the direction of three (3) or four (4).
That was the way to pick up speed on a vespa motorcycle, and how do I reduce the speed of the motor vespa ? Caranyapun almost the same as picking up speed on the Vespa, the difference is only in reverse.
1. If you want to reduce the speed of the Vespa, you simply press the clutch and then turn toward the gear you want and then release the clutch slowly. Easy right?
Posting Komentar Blogger Facebook